Advanced Motion Controls
DC Servo Drives
If you need help, call (412) 492-8116
Advanced Motion Controls
If your motor is not represented below, please call us as our capabilities are always expanding!
If your motor is not a AMC, refer to our DC Servo Drives list to view a list of manufacturers we can service.
100A20
Brushed DC motor drive designed for a high switching frequency. Fully protected against over-voltage. Peak current ±100 A with a max continuous load of ±50 A and can be operated on a supply between 30-200 VDC.
30A20C
DC Brush type motor drive designed for high frequency switching. Peak current of 30 A and continuous 15 A. Supply voltage of 30 - 125 VAC. Feedbacks supported are tachometers ±60 VDC and ±10 VDC positional.
30A8DD
DC Brush type motor drive designed for high frequency switching. Peak current of 30 A and continuous 15 A. Supply voltage of 20 - 80 VDC.
40A20
DC Brush type motor PWM drive designed for high frequency switching. Peak current of 20 A and continuous 15 A. Supply voltage of 30 - 190 VDC at 30 A
DPRANIR-C100A400
This series of digital drives is able to run brushed and brushless motors. Peak current on this drive is 100 A with a continuous current of 50 A, with an operating voltage of 200 - 240 AC and 255 - 373 DC. This drive supports resolvers, tachometers, ±10 VDC positional and incremental encoders.
DR100RE100A40NDC
This series of drives offers a fully digital system that can run brushed and brushless servo motors. Resolver feedbacks are supported with this unit. 60 - 400 VDC supply range. 100 A peak and 50 A continuous.
100A20
Brushed DC motor drive designed for a high switching frequency. Fully protected against over-voltage. Peak current ±100 A with a max continuous load of ±50 A and can be operated on a supply between 30-200 VDC.
30A20C
DC Brush type motor drive designed for high frequency switching. Peak current of 30 A and continuous 15 A. Supply voltage of 30 - 125 VAC. Feedbacks supported are tachometers ±60 VDC and ±10 VDC positional.
30A8DD
DC Brush type motor drive designed for high frequency switching. Peak current of 30 A and continuous 15 A. Supply voltage of 20 - 80 VDC.
40A20
DC Brush type motor PWM drive designed for high frequency switching. Peak current of 20 A and continuous 15 A. Supply voltage of 30 - 190 VDC at 30 A
DPRANIR-C100A400
This series of digital drives is able to run brushed and brushless motors. Peak current on this drive is 100 A with a continuous current of 50 A, with an operating voltage of 200 - 240 AC and 255 - 373 DC. This drive supports resolvers, tachometers, ±10 VDC positional and incremental encoders.
DR100RE100A40NDC
This series of drives offers a fully digital system that can run brushed and brushless servo motors. Resolver feedbacks are supported with this unit. 60 - 400 VDC supply range. 100 A peak and 50 A continuous.